Applications:
| Watch & clock | Gear wheel, pin, screw, movement of watches for watch manufacture, repair shops, Watch collectors, etc. --For cleaning. |
| Magnetic industry | Magnetic materials --Magnetic powder to be cleaned. |
| Pharmaceutical industry | Medicine bottles-- Cleaning of the medicine bottles before loading medicine. Use for Pharmaceutical factories and pharmaceutical machinery companies. |
| Medical | Injectors, operating instrument, pipet, glass container, esophagoscope, dental machinery, proctoscope, direction lens, microscope-used sample glasses. --To clean residue on the used operating instruments. --Use for Various large pharmaceutical and hospitals. |
How to test your Ultrasonic cleaners with best cleaning effect?
Foil test: Take three tiny pieces of 4” x 8” of an aluminum foil. Fold each of the foils over a rod then suspend the foil pieces into the tank, with one piece in the center of the tank, and each of the other two at opposite ends of the tank. Be sure the tank is filled to the max line. Turn on the Ultrasonic cleaning system for 10 minutes. Inspect after removing the foil, all three pieces should be perforated and furrowed.
Glass slide test: Wet a frosted piece of glass with tap water, and draw an “X” on the frosted side of the glass, corner to corner with a number two pencil. Make sure the tank is filled to the correct level with fresh Ultrasonic cleaning solution. Immerse the glass into the tank and activate the system. The “X” should begin to be removed immediately and should be gone completely from the glass within 10 seconds.
How can we ensure product quality?
1.R&D PROCESS: Marketing research.
Determine product features,details and perform industrial design.
Structural design.
Structural and manufacturability review.
Lid open/close durability test.
Cleaning effect test.
Durability test with 5000 working cycles
2.Laboratory test: Salt spray test.
High/Low-temperature tests, dry/wet tests.
Drop test.
Push-button durability test.
3.OQC, IQC, IPQC, QC, QC of PCB Department.
4. Support the third party to inspect goods.
5. Double-check before transportation.
Products details:
